News

What is the standard loading dock height?

Publicado por AJ Porter en

What is the standard loading dock height?

What is the standard loading dock height? 1.) In North America, the most commonly found dock height is 48–52 inches or (120–130 cm), though heights of up to 55 inches (140 cm) occur as well. A dock leveler can be used to  bridge the gap between a truck and a warehouse to safely accommodate a forklift Many facilities may choose a different dock height based upon unique trailer configurations.  A standard 53' trailer has a bed height @ 48". Overseas shipping containers @ 52"+ Straight Trucks / Box Trucks @ 40" - 50" An incline or decline approach can affect the the dock height....

Leer más →

Importance of Dock Barrier Run Off Gates

Publicado por AJ Porter en

Importance of Dock Barrier Run Off Gates

Whether you are a warehouse manager or an employee of the warehouse you don't need me to tell you the importance of safety and preventing a dreaded runoff. So what do we recommend? Vestil's Defender Gate. The hazards are present everywhere and it is incredibly evident that you need to prepare for the inevitable. Run away dock gates prevent your vital items from getting away from you, as it can be incredibly costly, and even dangerous. An ounce of prevention is worth a pound of cure, so make sure that you invest in a proper run off defender gate.  ...

Leer más →

14 Tips For Replacing Gas Springs

Publicado por AJ Porter en

14 Tips For Replacing Gas Springs

Only use within a temperature range of -40°F to 300°F (-40°C to 148°C). Do not heat above 300°F (148°C).Use additional locking mechanisms if failure of gas spring can cause injury. If you are going to be using this in a place that is close to food please ask in advance that you have food grade oils as parts might leak onto the ground or general area surrounding the gas springs location Allow for a bit of play within the joints, and if there is a potential for vibrations, make sure that all of the fittings are secured. DO NOT Pry...

Leer más →

How to Do Preventive Maintenance on Loading Docks

Publicado por AJ Porter en

How to Do Preventive Maintenance on Loading Docks

Loading dock equipment can many times be one of the most dangerous parts of a warehouse and need to be respected as such. Installed and used based on the manufactures guidelines, as they are there for a reason. Generally things occur when people decide to vary from what is prescribed. Please use these tips as an ounce of prevention is a pound of cure! Be familiar with what is called for by the manufactures guidelines, it is incredibly important to remember what is prescribed by the manufacture. Make sure to read and understand the manual fully as compliance could be...

Leer más →

Loading Dock Safety Tips Cont'd

Publicado por AJ Porter en

Loading Dock Safety Tips Cont'd

 If you are a warehouse manager or a worker in the warehouse you are more than likely well aware that the loading dock is one of the busiest areas of the warehouse. There are undoubtedly a lot of moving parts in a warehouse however its incredibly important to remember that if you can understand how everything is working together. Nearly 25 percent of all warehouse accidents occur at or around the loading dock.  Here are some safety tips and how to avoid those ever so treacherous hazards     Shifting trailer loads   Any truck or trailer is subject to...

Leer más →